1The push
Potential difference (p.d.), or voltage, is the push from the cell that drives the current. It is measured in volts (V).
Lesson 6.3 notes
Potential difference measured in volts, voltmeters, cell and lamp ratings, and resistance in ohms.
Potential difference (p.d.), or voltage, is the push from the cell that drives the current. It is measured in volts (V).
A voltmeter measures p.d. It is connected across a component, in parallel, so it can measure the p.d. between the component's two ends.
Cells joined in series make a battery. Their p.d.s add up: three 1.5 V cells give 4.5 V, so the lamp glows more brightly.
Cells and lamps are labelled with a voltage rating. A lamp given too little p.d. glows dimly; too much, and it glows brightly, then blows.
Resistance is how hard it is for current to flow through something. It is measured in ohms (Ω). For the same p.d., more resistance means less current.
resistance (Ω) = p.d. (V) ÷ current (A). A resistor with 6 V across it and 0.3 A through it has a resistance of 6 ÷ 0.3 = 20 Ω.
Conductors have a low resistance. Insulators have such a huge resistance that almost no current flows, even with a big p.d.
Choose a component and how many cells to use. Read the voltmeter and the ammeter, and see the resistance worked out.
An ammeter goes in the loop (in series) because the current flows through it. A voltmeter goes across a component (in parallel) because it measures the p.d. between the two ends of the component.
GCSE: Voltage and meters → GCSE: Resistance → GCSE: Investigate resistance →